Services
Plumbing & sewage in Valjevo
Reliable water and sewage installations are the backbone of every home - you never notice them when they work, and a single failure spreads fast. AQUATIM handles complete supply and drainage work, from the first pipe in a shell building to the last tap before you move in.
We run water distribution in PPR (polypropylene) pipe joined by heat welding, so there are no mechanical couplings to loosen over time. For drainage we use PVC and PP pipe with the correct fall, keeping the system quiet and clog-free. Before any wall is closed we pressure-test every line, so you know there are no hidden leaks before the tiler starts.
In older Valjevo houses we often find galvanized pipe rusted and narrowed from the inside - water pressure drops and the water can run brown. In those cases we recommend replacing the entire distribution with new pipe and fitting a main valve and dirt trap at the inlet. Smaller jobs such as replacing a cistern, trap or worn-out mixer tap are usually solved the same day.
Hidden leaks are found methodically - by inspecting joints, measuring pressure and tracing the path of moisture - before we open anything up. The goal is a targeted repair that doesn't turn your bathroom into a building site without reason.
What's included
- Site visit and assessment of the existing installation
- Hot and cold water distribution and drainage
- Pressure-testing the system before closing walls
- Fitting of sanitary ware, mixers and water heaters
- Leak detection and repair
Materials & equipment
- PPR pipe for hot and cold water (welded joints)
- PVC and PP drainage pipe with correct fall
- Angle valves, main valves and dirt traps
- Sanitary ware and mixer taps from established brands of your choice
From practice
From practice: in a flat on Peti puk in Valjevo we replaced the entire vertical water riser and the sewage stack with minimal chasing, and the residents were without water for just one afternoon.
How we work
Step 1
Inspection & quote
We come, survey the situation and give a clear, no-obligation estimate of scope and price.
Step 2
Pipe routing
We route pipe to every fixture, with correct gradients and access for future maintenance.
Step 3
Pressure test
We pressurize the system and confirm there are no leaks before walls are closed.
Step 4
Fit-out & handover
We fit sanitary ware and taps, clean up after ourselves and show you where the main valves are.
Frequently asked questions
Do you respond to emergency leaks?
Yes. With an active leak we first shut off the supply to stop further damage, then carry out the repair. Call us and we'll arrange the fastest possible callout - we're based in Valjevo and come out across Serbia.
Do you have to break walls to find a leak?
Not necessarily. We first measure pressure and trace the moisture to pinpoint the leak as precisely as possible, then open only the part of the wall that is genuinely needed.
Burst pipe, dead boiler, leaking AC?
Call and tell us the problem - you'll know the price before we start. Based in Valjevo, we come to you wherever you are in Serbia.